Skip to content

Interior commercial painting · Martin County

Interior commercial painting in Martin County

Inside a Stuart office or a Palm City medical suite, the hard part is not the wall. It is the receptionist, the patient file room and the server closet that cannot be switched off for a week.

A bright office with white desks, gray chairs, a whiteboard and a wall-mounted screen.

Much of the interior work here is in low buildings: one- and two-story offices along US-1 and Kanner Highway, strip-center suites, and the common halls of four-story condos. That keeps the access simple and makes the schedule the real problem. Each room gets a slot, and the tenant knows the slot before the first drop cloth goes down.

Humidity matters indoors too. A building whose air handlers are cycled down at night can hold moisture in the drywall, and paint laid on a damp wall dries soft and marks easily. Romco checks the surfaces and asks how the building runs its air before the coating schedule is set.

The scope lists each surface on its own line: gypsum walls, block in the stairs, hollow-metal frames, handrails, ceilings. That way the quote says what is painted, with what, and what is left alone. Send a floor plan or a phone video of the space to start.

Sequence

  1. Walk the space with the manager and mark which rooms and surfaces are in.
  2. Fix the phases, the working hours and who opens and locks the building.
  3. Cover floors, fixtures and furniture that stays in place.
  4. Patch, sand and prime damaged drywall and frames.
  5. Coat each phase and ventilate before tenants come back.
  6. Check each completed phase against the scope, with the manager, item by item.

Common failures

Where this work goes wrong in Martin County, and the control for each

A suite that never closes

A clinic or a title office runs every weekday. Work is split by room, moved to evenings or Saturdays where the lease and the landlord allow it, and each phase is confirmed with the tenant before it starts.

Damp walls under fresh paint

Air conditioning that is set back after hours leaves walls holding moisture. Surfaces are checked before coating, and the building's air schedule is agreed with the manager for the length of the job.

Touch-ups that flash

A patch rolled with a different sheen shows in raking light down a long corridor. Repairs are primed, and corridors are finished wall to wall rather than spotted.

Outside this scope

Furniture moves, IT equipment and file storage are either written into the scope or left to the tenant. Wallpaper stripping, drywall replacement beyond patching and any mold work are quoted separately; mold is coordinated with a licensed remediation firm.

Questions

About interior commercial painting

Can a medical office in Stuart be painted without closing?

Usually, by working room by room and outside patient hours. The order is agreed with the practice and the landlord first, and any room that must stay clean or quiet is handled on its own schedule.

Do you paint condo hallways and stairwells while owners are home?

Yes. Corridors are done in sections so one route to each unit stays open, and doors, carpets and elevator cabs are protected while the work is overhead or nearby.

How is the cost of a commercial paint job worked out?

From the building itself. We look at the surfaces and how worn they are, the stucco, sealant and rust repairs, the coating system, how each side is reached, who stays inside, and which color rules or board votes come first. Photos and drawings can start it; most quotes are confirmed with a walk. There is no rate card, because no two buildings wear the same way in this climate.

What size of building will you quote?

Any size. A single storefront in downtown Stuart, a stairwell in an office, a row of flex bays in Palm City or a full four-story condo on Hutchinson Island are all quoted the same way: from the surfaces, the access and the people around the work.

Is Romco licensed?

Yes. Romco Builders is a licensed Florida general contractor, headquartered in Fort Lauderdale. Ask for the license details and they come with your quote.

The order of work

Six steps, the same on every job

  1. Send the building

    Phone us, or send the request form along with photos or plans. Say what gets painted, who stays inside and what decisions are already made.

  2. Walk it with us

    We inspect the walls, trim and metal, decide the access for each elevation, and note what nearby needs protection.

  3. Scope and quote in writing

    The quote lists the washing, repairs, coating system, access, phases and anything still waiting on an approval.

  4. Color and approvals

    The color is checked against the county or city rule, and any board vote, permit or airport clearance is settled first.

  5. Wash, repair, coat

    Washing, repairs, primer and finish follow the agreed order, with drains covered and people below kept clear.

  6. Walk-through and closeout

    We walk the work with you, finish the punch list and hand over a record of the coatings used.

Interior commercial painting is quoted in every corner of Martin, including Stuart, Palm City, Jensen Beach, Hobe Sound, Port Salerno, Hutchinson Island, Jupiter Island, Sewall's Point, Indiantown, Ocean Breeze, and every other Martin city.

More painting work

Other buildings we quote in Martin County

From a Stuart storefront to an Indiantown plant, quoted at any size

Send the address and the surfaces. Romco will scope and quote it.

Romco Builders is a licensed Florida general contractor, headquartered in Fort Lauderdale. One storefront or a whole community: each job gets a written scope and a quote.

Call (772) 310-3298Request a quote