Sewall's Point, Martin County
Commercial painting in Sewall's Point
Sewall's Point is mostly homes, but its code keeps a B-1 business district for the community's retail and service needs: stores, personal service shops, professional and business offices, and churches. Buildings there are held to 30 feet, so commercial painting in the town means small, low buildings.
Low buildings make for ladder and small-lift work, so the planning is about the businesses and the street. Contractors in the town may work 8 AM to 5 PM, Monday to Saturday, and not on named holidays, and trucks over the weight limit must be out of sight after 5 PM.
The point sits between the St. Lucie River and the Indian River Lagoon, so salt and humidity reach every wall. The Town runs its own Building Department; Romco asks it what a repaint of a B-1 building requires before the work is scheduled.
Sources: Town of Sewall's Point: top code enforcement issues (hours, trucks) · Town of Sewall's Point: Building Department · Town of Sewall's Point: history (residential town with a business district)
Who reviews the work in Sewall's Point
Town of Sewall's Point Building Department
The Town issues its own permits. Its B-1 district allows retail, personal service and office uses, with buildings up to 30 feet.
Read the sourceGeneral information, not legal advice. Whether a repaint needs a permit or color approval depends on the building and the change; we confirm it with the issuing office first. Martin painting rules
What we quote in Sewall's Point
Buildings we quote here
- Interior commercial paintingSuites, lobbies, corridors and stair towers, sequenced around the people inside.Interior commercial painting in Martin →
- Exterior commercial paintingStucco, block and metal exteriors, repaired first and coated for river and ocean air.Exterior commercial painting in Martin →
- Mid-rise and coastal condo repaintsFour-story and lower condos: balconies, rails, walkways and board-approved colors.Mid-rise and coastal condo repaints in Martin →
- Warehouse and industrial paintingFlex bays, metal buildings, block warehouses, doors and steel, coated while work goes on.Warehouse and industrial painting in Martin →
- Parking deck coatings and lot stripingDecks, condo garages and surface lots: coatings, walls, columns and striping.Parking deck coatings and lot striping in Martin →
- Airport and transportation facility paintingHangars, terminals and support buildings, scheduled around airport security rules.Airport and transportation facility painting in Martin →
- Office, retail and tenant improvement paintingStorefronts, office suites and fit-outs, painted to the lease and the opening date.Office, retail and tenant improvement painting in Martin →
- HOA and multifamily repaintsVillas, townhomes, apartments and clubhouses, scoped so the board can vote on it.HOA and multifamily repaints in Martin →
- Hotel and hospitality paintingResorts, inns, restaurants and marinas, painted around guests and the season.Hotel and hospitality painting in Martin →
- Hospital, clinic and school building paintingClinic suites, hospital wings and classrooms, phased around the people using them.Hospital, clinic and school building painting in Martin →
- Elastomeric and waterproofing coatingsThick, flexible wall coatings and sealant work for stucco and block that let water in.Elastomeric and waterproofing coatings in Martin →
- Pressure washing and surface prepWashing, scraping and repair so the coating grips, with runoff caught before the drain.Pressure washing and surface prep in Martin →
- Something else?Romco quotes commercial painting on every kind of building at any size. If yours is not listed, describe it and we will scope it.Call (772) 310-3298 →
The order of work
Six steps, the same on every job
Romco Builders is a licensed Florida general contractor, headquartered in Fort Lauderdale. A single suite and a full condo community go through the same six steps.
Send the building
Phone us, or send the request form along with photos or plans. Say what gets painted, who stays inside and what decisions are already made.
Walk it with us
We inspect the walls, trim and metal, decide the access for each elevation, and note what nearby needs protection.
Scope and quote in writing
The quote lists the washing, repairs, coating system, access, phases and anything still waiting on an approval.
Color and approvals
The color is checked against the county or city rule, and any board vote, permit or airport clearance is settled first.
Wash, repair, coat
Washing, repairs, primer and finish follow the agreed order, with drains covered and people below kept clear.
Walk-through and closeout
We walk the work with you, finish the punch list and hand over a record of the coatings used.
Questions
Commercial painting in Sewall's Point
What hours can contractors work in Sewall's Point?
The Town's code enforcement page lists 8 AM to 5 PM, Monday to Saturday, with no work on named holidays. Heavy trucks must be garaged or out of sight after 5 PM.
How is the cost of a commercial paint job worked out?
From the building itself. We look at the surfaces and how worn they are, the stucco, sealant and rust repairs, the coating system, how each side is reached, who stays inside, and which color rules or board votes come first. Photos and drawings can start it; most quotes are confirmed with a walk. There is no rate card, because no two buildings wear the same way in this climate.
What happens if the building has lead paint?
Coatings put on before 1978 can hold lead. EPA's renovation rule covers work that disturbs it in pre-1978 housing and in child-occupied rooms such as a day care, and that work goes to a certified firm using lead-safe practices. We check the building's age and use first, and any abatement is coordinated with a licensed firm.
How long will the painting take?
We set the schedule after the walk, not before. It depends on the surfaces, the repairs found once the walls are washed, the summer rain, the access, any color approval and the hours the building or town allows. Instead of a date nobody controls, you get the sequence and the dependency behind each step.
Other Martin cities: Stuart · Palm City · Jensen Beach · Hobe Sound · Port Salerno · Hutchinson Island · Jupiter Island · Indiantown · Ocean Breeze · Unincorporated Martin County · Rio · Golden Gate
From a Stuart storefront to an Indiantown plant, quoted at any size
Send the address and the surfaces. Romco will scope and quote it.
Romco Builders is a licensed Florida general contractor, headquartered in Fort Lauderdale. One storefront or a whole community: each job gets a written scope and a quote.